Kupo June Promotion

Hey Kupo Kompadres,

For the Kupo June Promotion, we have a sizzling hot deal for the beginning of summer!

Kupo June Promotion - Buy a Max Arm with Hand Wheel and Get a Convi Clamp with Adjustable Handle - Free!

Between June 1, 2014 and July 31, 2014, customers will receive a free Convi Clamp with Adjustable Handle – Black (KG701511), a $23.75 value, with the purchase of a Kupo Max Arm with Hand Wheel (KG100911). This promotion is consumer only and does not apply to dealer purchases.

Kupo Grip’s Convi Clamp System from Kupo Grip on Vimeo.

The Max Arm is an adjustable arm that allows you to position a camera, lighting fixture or accessory in any position within seconds!

MAX ARM

The two 5/8″ (16mm) studs at either end are attached to ball joints that rotate 360 degrees, plus a cut-out in the sleeve surrounding the ball allows the stud to be bent 90 degrees. One stud is tapped to receive a 3/8″-16 thread, while the other is tapped to receive a 1/4″-20 thread. Each stud has six milled flat surfaces, so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability.

The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The large rubberized hand wheel slowly increases tension until all three joints lock at once making precise positioning a breeze.

CONVI CLAMP

The Convi Clamp is more than just an amazing clamp, it’s the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi accessories from a simple stud to the versatile Max Arm to mount almost any light fixture, camera or accessory. The receiver features a spring locking safety system to ensure that the Convi accessory won’t separate from the clamp if the locking screw loosens unexpectedly. The Convi Clamp has a jaw that will extend from 0.2″ – 2.0″ (5 – 51mm) in diameter. It also features a saddle to securely mount it on flat surfaces. This clamp has a ratcheted handle that allows you to reposition it should you not have clearance to rotate the handle in a complete circle to tighten or loosen it.

Share:

Kupo is at NAB Show in Las Vegas!

2014 promises to be another exciting year for digital imaging. For attendees at the National Association of Broadcasters show in Las Vegas, you will have the opportunity to meet Kupo Gear Guru Jason Friedman in-person. Feel free to pick his brain or try and stump him with your technical questions. Unlike other companies manufacturing grip equipment, Kupo has flexibility in not having to adhere to the status-quo. Kupo’s innovations include the Kwik Kollar upgrade for the traditional C-Stand that rapidly speeds up deployment and breakdown on set. So if you have any mods or hacks that you want to share, talk to our Gear Guru.

Kupo Grip will have a lot of our latest gear on display at our booth at NAB in the Central Hall,  booth 11133. Feel free to fondle and test Kupo’s gear to determine if you are ready to accept the Kupo Advantage and add our rugged and reliable gear to your own studio.

Share:

Kupo 9″ Super Viser Promotion

October Promotion – Take advantage of this 20% off  hot deal on one of the most useful clamps in Kupo’s grip arsenal, the 9″ Super Viser Clamp (KG600212)

Fashioned after the famous Cardellini Clamp, the Super Viser is an extremely strong and versatile clamp. It can mount securely onto round and square objects, or just about any unique shape up to 8″ in diameter. The jaw position remains fixed on one side of the clamp, enabling it to be mounted where limited space is available. The specially formulated grip pad provides a strong grip, yet protects the surface it’s clamped around. Besides the built-in baby pin, another Kupo innovation outfits this clamp with a hexagonal receiver that accepts the full compliment of Convi Clamp accessories. Another advantage of this clamp is has a chamfered slot running down the back of the main bolt. This keeps the jaws from rotating freely, around the threaded central bolt, maintaining their locations so you can easily mount the clamp with one hand. These clamps boasts an impressive load capacity of 66.1 lbs (30 Kg) and comes in a silver aluminum finish.

Kupo October Promotion

 Purchase any quantity of 9″ Super Viser Clamps (KG600212) and get a 20% discount. $65.00 retail. Only $52.00 with rebate!

FOR MAIL-IN REBATE

  1. Just purchase any quantity of 9″ Super Viser Clamps between October 15th and December 15th from any Kupo Dealer.
  2. Download the Rebate Form
  3. Mail Rebate Form
  4. Wait impatiently for rebate check!

 Super Viser 20% Rebate

 FOR INSTANT REBATE

  1. Purchase any quantity of 9″ Super Viser Clamps between October 15 and December 15 online at www.kupogrip.com
  2. During Checkout, use the code SUPERVISER20
  3. Once the code is entered, the 9″ Super Viser’s price will be reduced by 20%.
  4. Wait impatiently for 9″ Super Viser to arrive at your destination!

All submission requirements are located on the Rebate Form. Take advantage of this hot deal and  Happy Independence Day!

Kupo Grip – Never Let Go!

Share:

Max Arms

Max Arm with Big Hand Wheel (KG100911)

Max Arm with Big Hand Wheel (KG100911)

 

Kupo Max Arm with Adjustable Handle (KG100211)

Max Arm with Adjustable Handle (KG100211)

The Max Arms are adjustable arms that allows you to position a camera, lighting fixture or accessory in any position within seconds!

The two 5/8″ (16mm) studs at either end are attached to ball joints that rotate 360 degrees, plus a cut-out in the sleeve surrounding the ball allows the stud to be bent 90 degrees. One stud is tapped to receive a 3/8″-16 thread, while the other is tapped to receive a 1/4″-20 thread. Each stud has six milled flat surfaces, so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability.

The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. You have the choice between two models, one with a ratcheting adjustment handle and the other has large rubberized hand wheel. They both slowly increase tension until all three joints lock at once making precise positioning a breeze.

For more information and technical specifications:

Share:

Win a C-Stand Kit!

HEY KUPO KOMPADRES!

Sign up today for our monthly newsletter and you’ll be automatically entered to win a Master 40″ C-Stand Kit with Turtle Base (Cat.# KS743712), a $177.00 value! 

Kupo Master C-Stand Kit - KS743712

Kupo Master C-Stand Kit (KS743712)

THIS IS NOT YOUR DADDY’S C-STAND!

Ever find yourself struggling to open and close a C-Stand? Besides the professional grips who open and close these bad boys everyday, most everybody at one point or another has struggled to open or close a C-Stand. Not any more! With the game changing innovation of Kupo’s Master C-Stand, you can open or close your stand in just a second! The unique spring loaded Kwik Collar makes the task a snap and saves you both time and frustration. 

Just one second to open or close the Kupo Master C-Stand!

Just one second to open or close the Kupo Master C-Stand!

For those unfamiliar with C-Stands in general, they are the most common and useful of all grip equipment. You can support lights, light modifiers, backgrounds, accessories etc. Our Master C-Stand has a “turtle base” which means that it removes from the riser sections quickly and easily for transportation or storage. 

Click on the link below and check out both the video and the features of our Master C-Stand with Turtle Base. Just fill out the quick form to receive our newsletter and you could be the winner of our monthly c-stand kit giveaway. 

http://www.kupogrip.com/content/master-c/

 Never Let Go!

Share: