40″ Hex Grip Arm with Big Handle

THIS IS NOT YOUR DADDY’S GRIP ARM!

Have you ever tried to use a grip arm as a mini boom by mounting a light fixture at the end of it, only to find gravity pulling it downwards because the set screw wasn’t strong to hold up its weight? We’ll now there’s a simple solution.

Kupo just introduced an exciting innovation in grip arm design. At the end of our 40″ grip arm, you will find a baby hex pin with six milled flat surfaces. So now you can mount your light fixtures or accessories on the end of your grip arm like a mini boom and they won’t rotate due to the set-screw of that fixture or accessory, locking onto one of the sides of the hex pin.

40" Grip Arm with Hex Pin - KG203711

40″ Grip Arm with Hex Pin – KG203711

 

Hex Pin Detail

Hex Pin Detail

 

Milled Flat Detail

Set-screw tightened against one of the milled flats so it won’t rotate.

 

40" Hex Grip Arm in Action

40″ Hex Grip Arm Supporting a 1K Fresnel.

Silver 40″ Grip Arm with Big Handle – KG203711

Black 40″ Grip Arm with Big Handle – KG203612

The 40″ Hex Grip Arm with Big Handle is a 2 1/2″ Grip Head mounted on the end of a 40″ steel bar 5/8″ (16mm) in diameter that is painstakingly machined to create a rough non-slip surface. At the end is a hex pin with six milled flats. The 40″ Hex Grip Arm is available in both machined silver and a stealthy black powder coat. Below you will find more information and technical specifications.

Length: 42.75 in / 108.59 cm
Width: 6.19 in / 15.72 cm
Height: 2.50 in / 6.35 cm
Weight: 3.04 lb / 1.38 kg
Accessories

Share: