The Kupo Junior 4” Wall Plate allows you to mount a 1-1/8” (28mm) receiver anywhere on a wall, other flat surface or just about anywhere. This plate gives you the option of mounting it by using screws or nails through any of the 8 anchor points pre-drilled into the plate. Attached to a wood or metal base, they make great free-standing floor mounts, also known as “pigeon” plates, or can be positioned almost anywhere when clamped between the discs of a grip head. This adapter comes with a metal locking knob and is clad in a chrome plated steel finish.
4″ Junior Receiver Wall Plate (KG003712)
Check out the video below to see how it is used as a pigeon plate as well as some other applications for such a handy piece of grip equipment.
Visit the product page for more information and specifications.
This question was sent to me via our free Personal Gear Guru service by Randolph, asking about our 5″ Grip Pin to mount a lighting fixture in the 40″ Grip Arm that comes with a C Stand Kit.
First I’d like to say thank you for all the wonderful videos you have on this site. They’re very informative and easy to follow.
I was going to buy the Avenger A2030D 9.8′ Turtle Base kit + Avenger E650 Baby (5/8″) Pin with Collar to use with a beauty dish.
Instead of the Avenger stand, I would like to buy the Kupo 40″ Master C Stand with Turtle Base Kit. Is the Kupo Baby 5/8″ (16mm) Snap-in Pin the pin I’ll need to purchase?
A: GEAR GURU
You will need the 5″ Grip Arm Pin to support your lighting fixture. Just place it in the baby (5/8″) opening in the grip head, position the pin angle, tighten the grip head, and you’re ready to rock!
5″ Grip Pin (KG002212)
Remember to place one of the legs in-line with the grip arm so it won’t tip and to use a sandbag on the turtle base for safety! If you have any other questions, feel free to ask!
Thank you for the inquiry, your comments on our videos and for supporting Kupo Grip!
Jason Friedman – Your Personal Gear Guru
Never Let Go!
The Scraper is stiff bladed putty knife with a built in baby 5/8” (16mm) stud. The 0.04” (1.1mm) thin metal blade is designed for jamming into tight spaces such as the gap between a door and its frame, placed under a stack of books or between two books on a shelf, clamped to a ladder step, etc. The baby 5/8” (16mm) stud has a safety indentation for securely hanging small lighting fixtures. There are three holes drilled into the blade designed as anchor points for mounting by screws or nails.
Scraper in Tight Spot!
So whether you need to rig some grip equipment, do some home improvement, or both, this handy gadget can get you in and out of a jamb!
For technical information, check out the product page.
Never Let Go!