Standard Alli Clamps

Standard Alli Clamps are an all-purpose steel spring clamps with a baby (5/8” – 16mm) receiver to accept any baby 5/8” (16mm) stud. The regular size clamps also feature a baby stud for mounting into a baby receiver. The baby stud is tapped with a 3/8″-16 female thread for mounting to a 3/8″-16 male thread. 

The clamp’s jaws pack quite a bite with a strong spring to hold them closed. This clamp can be mounted to both flat and round surfaces. This is the perfect accessory to hold a fill card or flag. 

 There are two sizes available, both the regular and the mini. 

Black Standard Alli Clamp - KG302011

Black Standard Alli Clamp – KG302011

 

Silver Standard Alli Clamp - KG302412

Silver Standard Alli Clamp – KG302412

The mini is physically smaller and doesn’t have the baby stud. 

Black Mini Alli Clamp - KG301411

Black Mini Alli Clamp – KG301411

 

Silver Mini Alli Clamp - KG301712

Silver Mini Alli Clamp – KG301712

Check out the Standard Alli Clamp Video.

Kupo Standard Alli Clamps from Kupo Grip on Vimeo.

For more information and technical specifications: 

KG301411  – MINI ALLI CLAMP – BLACK
KG301712  – MINI ALLI CLAMP – SILVER
KG302011  – ALLI CLAMP – BLACK
KG302412  – ALLI CLAMP – SILVER

 

 

Share:

Off Camera Flash Alli Clamp

The Off Camera Flash Alli Clamp is an incredibly handy accessory that consists of an Alli Clamp with a mini ball head and cold shoe enabling the user to mount and position an on-camera flash virtually anywhere in seconds! The Off Camera Alli clamp can be mounted on both round objects such as the riser sections on your light stands as well as flat mounted objects such as a table, door or the back of a chair.

Off Camera Flash Alli Clamp (KG302511)

Off Camera Flash Alli Clamp (KG302511)

The Off Camera Alli Clamp comes with a baby, 5/8″ (16mm) receiver so you can mount it directly to the top of a standard light stand and give you the ability to position it freely. It also comes with a male baby, 5/8″ (16mm) stud with it’s center tapped with a 3/8″-16 female thread to give a considerable flexibility for mounting it almost anywhere that the 1.575″ (40mm) jaw can accommodate. 

Stand Mount Detail

Stand Mount Detail

 

Flat Mounting Detail

Flat Mounting Detail

The cold shoe is completely made from metal and has a spring loaded dovetail design with a set-screw to give you the ability to lock any mounting shoe from virtually any off camera flash and mount it securely. 

Kupo Cold Shoe (KG006711)

Kupo Cold Shoe (KG006711)

 TECHNICAL SPECIFICATIONS

  • Minimum Jaw Diameter – 0.197 in (5.00 mm)
  • Maximum Jaw Diameter – 1.575 in (40.0 mm)
  • Length – 6.250 ” (15.875 cm)
  • Width  – 3.875″ (9.843 cm)
  • Height – 3.875″ (9.843cm)
  • Weight – .850 lbs (.385 KG)
  • Cat # – KG302511

Never Let Go!

Share: