Kupo June Promotion

Hey Kupo Kompadres,

For the Kupo June Promotion, we have a sizzling hot deal for the beginning of summer!

Kupo June Promotion - Buy a Max Arm with Hand Wheel and Get a Convi Clamp with Adjustable Handle - Free!

Between June 1, 2014 and July 31, 2014, customers will receive a free Convi Clamp with Adjustable Handle – Black (KG701511), a $23.75 value, with the purchase of a Kupo Max Arm with Hand Wheel (KG100911). This promotion is consumer only and does not apply to dealer purchases.

Kupo Grip’s Convi Clamp System from Kupo Grip on Vimeo.

The Max Arm is an adjustable arm that allows you to position a camera, lighting fixture or accessory in any position within seconds!

MAX ARM

The two 5/8″ (16mm) studs at either end are attached to ball joints that rotate 360 degrees, plus a cut-out in the sleeve surrounding the ball allows the stud to be bent 90 degrees. One stud is tapped to receive a 3/8″-16 thread, while the other is tapped to receive a 1/4″-20 thread. Each stud has six milled flat surfaces, so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability.

The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The large rubberized hand wheel slowly increases tension until all three joints lock at once making precise positioning a breeze.

CONVI CLAMP

The Convi Clamp is more than just an amazing clamp, it’s the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi accessories from a simple stud to the versatile Max Arm to mount almost any light fixture, camera or accessory. The receiver features a spring locking safety system to ensure that the Convi accessory won’t separate from the clamp if the locking screw loosens unexpectedly. The Convi Clamp has a jaw that will extend from 0.2″ – 2.0″ (5 – 51mm) in diameter. It also features a saddle to securely mount it on flat surfaces. This clamp has a ratcheted handle that allows you to reposition it should you not have clearance to rotate the handle in a complete circle to tighten or loosen it.

Share:

Kupo July Promotion

The Summer is heating up. How about a hot deal to celebrate this 4th of July! 

Kupo July Promotion

Purchase a Kupo Handy Stand (KS041011) and get a black Convi Clamp with Adjustable Handle (KG701511) – $23.75 Value. Free with rebate!

FOR MAIL-IN REBATE

  1. Just purchase a Handy Stand between July 1st and 31st from any Kupo Dealer.
  2. Download the Rebate Form
  3. Mail Rebate Form
  4. Wait impatiently for free Convi Clamp!

Instant Rebate Code

 FOR INSTANT REBATE

  1. Purchase a Handy Stand between July 1st and 31st online at www.kupogrip.com
  2. Add both the Handy Stand (KS041011) and Black Convi Clamp with Adjustable Handle (KG701511) to the shopping cart.
  3. During Checkout, use the code KUPOCONVI
  4. Once the code is entered, the Convi Clamp’s price will be reduced to zero.
  5. Wait impatiently for free Convi Clamp!

All submission requirements are located on the Rebate Form. Take advantage of this hot deal and  Happy Independence Day!

Kupo Grip – Never Let Go!

Share:

Convi Clamp System

The Convi Clamp is more than just an amazing clamp, it’s the foundation of an entire grip system. The all-metal Convi Clamp is made from a strong lightweight alloy certified with a TÜV Rheinland safety rating. It features a hexagonal receiver that accepts dozens of  accessories from a simple stud to the versatile Max Arm to mount almost any light fixture, camera or accessory. The receiver features a spring locking safety system to ensure that the accessory won’t separate from the clamp if the locking screw loosens unexpectedly. It also features a saddle to securely mount it on flat surfaces. These clamps come clad in a silver alloy or stealthy black powder coated finish. 

Convi Clamp with Adjustable Handle

Convi Clamp with Adjustable Handle

Check out the video below to see an example of how Convi Convi Clamps operate and what they are used for.

Kupo Grip’s Convi Clamp System from Kupo Grip on Vimeo.

  Visit the product page for more information and specifications.

 

Share:

Hex Baby 5/8″ Stud with 3/8″-16 M

The Camera Hex Stud, 3/8”-16 M is a stud with a hexagonal adapter on one side to be mounted into a Convi Clamp and a round baby 5/8” (16mm) adapter on the other with a 3/8″-16 male thread. The Camera Hex Stud, 3/8”-16 M is made from solid brass.

Camera Hex Stud - 3/8"-16M (KG002512)

Camera Hex Stud – 3/8″-16M (KG002512)

This stud allows you to mount any baby receiver or female 3/8-“16 thread to a Convi Clamp or Super Viser Clamp with a hex receiver. Say you wanted to mount a two strobe heads or monolights on a light stand. You could mount one anywhere on the riser of your lightstand and all you would need is a Convi Clamp and this stud and you would be good to go.

Check out the video below to an example of how this product is used.

 Visit the product page for more information and specifications.

Share:

Hex Swivel Extension Arm with 5/8″ Receiver

The Swivel Extension Arm Hex Stud to 5/8” (16mm) Receiver is a mini extension arm with a hexagonal stud on one side, designed for the Convi Clamp System, and a baby 5/8” (16mm) receiver on the other. It has a double ball elbow joint giving you the ability to articulate the two sides in any direction.

Hex Swivel Adapter with Baby Receiver (KG001712)

Hex Swivel Adapter with Baby Receiver (KG001712)

Check out the video below to see an example of how the Hex Swivel Extension with 5/8″ Receiver is used. As you can see this handy adapter can give you an easy way to position your equipment, whether or it’s a field recorder or field monitor. It can also be used in reverse. You can place the baby receiver on the stud of a light stand and attach a Convi Clamp or Super Viser Clamp to hold just about anything.

 Visit the product page for more information and specifications.

Share: