BABY 5/8″ (16mm) SNAP-IN PIN
This Convi Clamp accessory has a hex stud on one side and baby stud the other for mounting light fixtures or any other piece of grip equipment or accessory with a baby receiver. These babies are generally bought by the handful and considered a “must have” item in your grip bag.
The solid steel pin is one of the most common accessories that you can find for the Convi Clamp System.
The Baby 5/8″ Snap-In Pin mounted in a Convi Clamp with Adjustable Handle. The advantage of the hex pin is that it won’t rotate in the clamp’s receiver. Also there is a safety mechanism built into the Convi Clamp, if the set-screw ever comes loose, the pin can’t be separated from the clamp unless the safety button is pressed down first.
The same Baby 5/8″ Snap-In Pin mounted to Convi Clamp with Adjustable Handle clamped around the riser of a C-Stand. This gives us the freedom to mount our Profoto head or any other light fixture with a baby receiver anywhere we’d like on the riser section. This is perfect if you want an ultra-low mounting position and your stand is of normal height or is too tall.
Not only are they designed for our Convi family of clamps, but also for our Super Viser Clamps with the same hex receiver that also feature the hex receiver. If you ever needed a clamp with a baby pin on both ends, the Super Viser with a Baby 5/8″ Snap-In Pin would be a perfect solution.
Baby 5/8″ Snap-In Pin technical specifications.
Kupo Grip – Never Let Go!